The Importance Of Determining A Plant Location

The Importance Of Determining A Plant Location The location of a plant or facility is the geographical positioning of an operation relative to the input resources and other operations or customers with which it interacts. Andrew Greasly (2003) identified three main reasons why a location decision is required. The first reason is that a new company has been created and needs a facility to manufacture products or deliver a service to its customers. The second reason is that there is a decision to relocate an existing business due to a number of factors such as the need for larger premises or to be closer to a particular customer base. The third reason is relocate into new premises in order to expand operations. Decisions with regards to where an organisation can locate its plant or facility are not taken often, however they still tend to be very important for the firms profitability and long-term survival. An organisation which chooses an inappropriate location for its premises could suffer from a number of factors, and would find it difficult and expensive to relocate. Location decisions tend to be taken more often for service operations than manufacturing facilities. Facilities for service related businesses are usually smaller in size, less costly, and are located in a location that is convenient and easily accessible to customers (Russell and Taylor, 2003). When deciding where to locate a manufacturing facility different reasons apply, such as the cost of constructing a plant or factory. Although the most imporant factor for a service related business is access to customers, a set of different criteria are important for a manufacturing facility (Russell and Taylor, 2003). These include the nature of the labor force, proximity to suppliers and other markets, distribution and transportation costs, the availability of energy and its cost, community infrastructure, government regualtions and taxes, amongst others (Russell and Taylor, 2003). Location Strategy The facilities location problem is one of major importance in all types of business. It is important to notice the different problems that may arise whilst trying to choose a suitable location. Normally, the decision on siting proceeds in two stages: in the first, the general area is chosen; and then a detailed survey of that area is carried out to find suitable sites where the plant or facility could be located (Muhlemann, Oakland and Lockyer, 1992). However, the final decision as to where to locate a facility is made by taking into consideration more detailed requirements. The following are a number of factors which might influence the choice of location (Muhlemann, Oakland and Lockyer, 1992). Proximity to market: organisations may wish to locate their facility close to their market, to be able to lower transportation costs, and most importantly, to be able to provide their customers with a better service. If the plant or facility is located close to the customer, the organisation would be in a better position to provide just-in-time delivery, to respond to fluctuations in demand and to react to field or service problems. Availability of labour and skills: a number of geographical areas have traditional skills but it is very difficult for an organisation to find a location which has the appropriate skilled and unskilled labour, both readily available and in the desired quantities. Even so, new skills can be tought, processes simplified and key personnel moved from one area to another. Availability of amenities: organisations would prefer to locate their facilities in a location which provides good external amenities such as housing, shops, community services and communication systems. Availability of inputs: a location which is near main suppliers will help to reduce cost and allow staff to meet suppliers easily to discuss quality, technical or delivery problems, amongst others. It is also important that certain supplies which are expensive or difficult to procure by transport should be readily available in the locality. Availability of services: there are six main services which need to be considered whilst a location is being chosen namely; gas and electricity, water, drainage, disposal of waste and communications. An assessment must be made of the requirements for these, and a location which provides most or all of these services will be more attractive than another which does not. Room for expansion: organisations should leave room for expansion within the chosen location unless long term forecast convey very accurately that the plant will never have to be altered or expanded. This is often not the case and thus adequate room for expansion should be allowed. Safety requirements: certain production and manufacturing units may present potential hazards to the surrounding neighbourhood. For example certain plants such as nuclear power stations and chemical factories should be located in remote areas. Site cost: the cost of the site is a very important factor, however it is necessary to prevent immediate benefit from jeopardising the long-term plans of an organisation. Political, cultural and economic situation: it is also important to consider the political situation of potential locations. Even if other considerations demand a particular site, knowledge of the political, cultural and economic difficulties can assist in taking a number of decisions. Special grants, regional taxes and import/export barriers: it is often advantegous for an organisation to build its plant or facility in a location where the government and local authorities often offer special grants, low-interest loans, low rental or taxes and other grants. Location Selection Techniques The location selection process involves the identification of a suitable region/country, the indentification of an appropriate area within that region and finally comparing and selecting a site from that area which is suitable for an organisation. The following are a number of analytical techniques from the several that have been developed to assist firms when choosing a location. Weighted Score The weithed scoring technique tries to take a range of considerations into account, including cost (Greasly, 2006). This technique, which is also referred to as factor rating, consists of determining a list of factors that are relevant to the location decision. Each factor is then given a weighting that conveys its importance compared with the other factors. Each location is then scored on each factor and this score is multiplied by the factor value. The alternative with the highest score is then chosen (Greasly, 2006). Locational Break-Even Analysis This technique makes use of cost-volume analysis to make an economic comparison of location alternatives. An organisation would have to identify the fixed and variable costs and graphing them for each location, thus determining which one provides the lowest cost. Locational break-even analysis may be carried out mathematically or graphically. The procedure for graphical cost-volume analysis is as follows (Falzon, 2009): Determine the fixed and variable costs for each location. Plot the total cost (i.e. the fixed + the variable) lines for the location alternatives on the graph. Choose the location with the lowest total cost line at the expected production volume level. 2.1.2 Plant Layout According to Andrew Greasly (2007), the layout of a plant or facility is concerned with the physical placement of resources such as equipment and storage facilities, which should be designed to facilitate the efficient flow of customers or materials through the manufacturing or service system. He also noted that the layout design is very important and should be taken very seriously as it can have a significant impact on the cost and efficiency of an operation and can involve substantial investment in time and money. The decisions taken with regards to the facility layout will have a direct influence on how efficiently workers will be able to carry out their jobs, how much and how fast goods can be produced, how difficult it is to automate a system, and how the system in place would be able to respond to any changes with regards to product or service design, product mix, or demand volume (Russell and Taylor, 2003). In many operations the installation of a new layout, or redesign of an existing layout, can be difficult to change once they are implemented due to the significant investment required on items such as equipment. Therefore, it is imperative to make sure that the policy decisions relating to the organisation, method and work flow are made before the facilities are laid out rather than trying to fit these three into the layout. This is an important area of production and operations management since it is dealing with the capital equipment of the organisation which, in general, is difficult to relocate once it has been put into position. Muhlemann, Oakland and Lockyer (1992) explained that the plant layout process is rather complex, which cannot be set down with any finality, and one in which experience plays a great part. The author also explained that it is impossible for an organisation to design the perfect layout, however he discussed a number of criteria which should be followed to design a good layout, namely the following: Maximum Flexibility A good layout should be designed in such a way that modifications could rapidly take place to meet changing circumstances, and thus should be devised with the possible future needs of the operation in mind. Maximum Co-ordination The layout should be designed in such a way that entry into, and disposal from, any department or functional area should be carried out in the most convenient way to the issuing and recieving departments. Maximum use of volume The facility should be considered as cubic devices and maximum use is to be made of the volume available. This principle is useful in stores, where goods can be stored at considerable heights without causing any inconvenience. Maximum visibility The authors further insists that all the workers and materials should be readily observable at all times and that there should be no hidden places into which goods or information might get misplaced and forgotten. Organisations should be careful when they make use of partitioning or screening as these may introduce undesirable segregation which reduces the effective use of floor space. Maximum accessibility The machinery, equipment and other installations should not in any way obstruct the servicing and maintenance points, which should be readily accessible at all times. Obstructing certain service points such as electricity and water mains could hinder the production process in place. Minimum distance and Material handling All movements taking place within the plant should be both necessary and direct. Handling work does add the cost but does not increase the value, thus any unecessary movement should be avoided and if present, eliminated. It is best not to handle the material and information, however if this is necessary it should be reduced to a minimum by making use of appropriate devices. Inherent Safety All processes which might constitute a danger to either the staff or customers should not be accessible to the unauthorised. Fire exists should be clearly marked with uninhibited access and pathways should be clearly defined and uncluttered. Unidirectional Flow All materials which are being used in the production process should always flow in one direction, starting from the storage, passing through all processes and facilities, and finally resulting in the finished product which is later dispatched for storage or sold directly to the customer. Management Coordination Supervision and communication should be assisted by the location of staff and communication equipment in place within the chosen layout. 2.2 Quality Management There is a widespread acceptance that organisations view quality as an important strategic core competence and a vital competitive weapon which should be used to gain a competitive advantage at the expense of rivals. Several organisations have been able to reep a number of benefits, such as substanstial cost savings and higher revenues, after implementing a quality improvement process into their operations. Subsequently, this led them to invest substantial amounts of money yearly on implementing and sustaining quality programmes and intiatives. The American National Standards Institution (ANSI) and the American Society for Quality Control (ASQC) define quality as the totality of features and characteristics of a product or service that bears on its ability to satisfy given needs. Similarily, Feigenbaum (2005), who is an American quality control expert, has defined quality as the total composite product and service characteristics of marketing, engineering, manufacture, and maintenance through which the product and service in use will meet the expectation by the customer. Put simply, this refers to an organisations ability to manufacture a product or deliver a service which satisfy the customers requirements and needs, and which conform to specifications. Muhlemann, Oakland and Lockyer, authors of Production and Operations Management (1992), noted that organisations must be dedicated to the continous improvement of quality and must implement systematic control systems that are designed to prevent the production or delivery of products or services which do not conform to requirements. To facilitate this process, organisations should first set up a quality policy statement which describes their general quality orientation and which is used to assist as a framework for action. Once set up, top management would be required to: ensure that is it understood at all levels of the organisation; identify the needs of the organisations customers; evaluate the organisations ability to meet these needs; make sure that all the materials and services supplied fit the required standards of efficiency and performance; continously train the workforce for quality improvement; assess and monitor the quality management systems in place. 2.2.1 Quality Control and Assurance in the Conversion Process Ray Wild (2002) has noted that the capability of the conversion process directly influences the degree to which the product or service conforms to the given specification. If the conversion process is capable of producing products or services at the specified level, then the products or services are provided at the desired quality level. Once the specification of the output is known and an appropriate process is available, management must ensure that the output will conform to the specification. In order to achieve this objective Ray Wild (2002) has defined three different stages which are outlined in figure 2.1; each discussed below. Figure 2.: The stages, processes and procedures of quality control and assurance Essentials of Operations Management by Ray Wild (2002) Control of Inputs Before accepting any items as inputs, organisations must make sure that they conform to the required specifications and standards. Normally, before items are supplied to an organisation, they are subjected to some form of quality control by the supplier. The organisation might also ask its suppliers for information about the quality of the items whilst they are being prepared, ask for a copy of the final inspection documentation, or ask a third party such as an insurance company to make sure that all the items supplied conform to the required quality standards. Even so, organisations still find the need to inspect the items supplied once they are recieved and before they are inserted into the conversion process. This inspection can be carried out by either inspecting every item recieved from suppliers, or by making use of the acceptance sampling procedure, which consists of taking a random sample from a larger batch or lot of material to be inspected. Organisations might also make use of the vendor rating procedure whereby suppliers are rated by taking into account a number of quality related factors such as the percentage of acceptable items recieved in the past, the quality of the packaging, and the price. Control of Process All manufacturing organisations must make sure that appropriate inspection is carried out during operations to ensure that defective items do not proceed to the next operations, and also to predict when the process is most likely to produce faulty items so that preventive adjustments could be adopted (Ray Wild 2002). The quality control of the production process is facilitated by making use of control charts, which convey whether the process looks as though it is performing as it should, or alternatively if it is going out of control. One of the benefits of this procedure is that it helps management to take action before problems actually take place. Ray Wild (2002) also notes that organisations should establish procedures for the selection and inspection of items which are used in the conversion process, for the recording and analysis of data, scrapping of defectives, and for feedback of information. Control of Outputs Organisations must ensure that the qulity inspection of output items is carried out effectively since any undetected defective items would be passed on to the customer. The inspection of output items is normally carried out by making use of a sampling procedure, such as acceptance sampling, or by carrying out exhaustive checks. Ray Wild (2002) notes that it is vital for an organisation to have in place suitable procedures designed for the collection and retention of inspection data, for the correction, replacement or further examination of defective items, and for the adjustment or modification of either previous inspection or processing operations in order to eliminate the production of defective items. 2.2.2 HACCP Nowadays, the food industry is responsible of producing safe products and also for conveying in a transparent manner how the safety of food is being planned, controlled and assured. In order to do so, organisations in the food industry need a system which will ensure that food operations are designed to be safe and that potential hazards are taken into account (Mitchell, 1992). One such system is the Hazard Analysis of Critical Control Points which is a scientific and systematic method used to assure food safety, and a tool for the development, implementation and management of effective safety assurance procedures (Ropkins and Beck, 2000). The HACCP is known to be one of the best methods used for assuring product safety and is considered as a prerequisite for food manufacturing companies who wish to export their products into international markets. The objective of the HACCP system is to guarantee that the safe production of food by implementing a quality system which covers the complete food production chain, from the promary sector up to the final consuming of the product (Fai Pun and Bhairo-Beekhoo, 2007). It is capable of analysing the potential hazards in a food operation, identifying the points in the operation where the hazards may take place, and deciding which of these may be harmful to consumers (Mitchell, 2002). These points, which are referred to as the critical control points, are continously monitored and remedial action is effected if any of these points are not within safe limits. The HACCP is the system of choice in the management of food safety; one which is highly promoted by the food safety authorities in the United States, Canada and European Union. 2.3 Just-In-Time Scheduling 2.3.1 Scheduling in Manufacturing Decision making with regards to scheduling has become a very important factor in manufacturing as well as in service industries. Scheduling is a decision making process whereby limited resources are allocated to specific tasks over time in order to produce the desired outputs at the desired time (Psarras and Ergazakis, 2003). This process helps organisations to allocate their resources properly, which would further enable them to optimise their objectives and achieve their goals. A number of functions, conveyed in figure 2.2, must be performed whilst scheduling and controlling a production operation. Figure 2.: Functions performed in scheduling and controlling a production operation Adopted from the journal,Production scheduling in ERP systems, by Psarras Ergazakis (2003) In manufacturing systems, scheduling is highly dependent on the volume and variety mix of the manufacturing system itself. Mass process-type systems, which normally make use of a flow (product) layout where a standard item is produced in high volumes, make use of specialised equipment dedicated to achieve an optimal flow of work throughout the system (Greasly, 2006). Greasly notes that this is very important since all items follow the same sequence of operations. One of the most important objectives of a flow system is to make sure that production is kept at an equal rate in each production that takes place. This could be ensured by making use of the line balancing technique, which makes sure that the output of each production stage is equal and that all resources all fully utilised (Greasly, 2006). 2.3.2 Just-In-Time The Just-In-Time Philosophy The just-in-time philosophy originated from the Japanese auto maker Toyota after Taiichi Ohno came up with the Toyota Production System whose aim was to interface manufacturing more closely with the companys customers and suppliers. This particular philosophy is an approach to manufacturing which seeks to provide the right amount of material when it is required, which in turn leads to the reduction of work-in-progress inventories and aims to maximise productivity within the production process (Singh and Brar, 1991). The authors, Slack, Chambers and Johnston, of Operations Management (2001) defined the JIT philosophy as a disciplined approach to improving overall productivity and elimination of waste. They also state that it provides for the necessary quantity of parts at the right quality, at the right time and place, while using a minimum amount of facilities, equipment, materials and human resources. Thus, put simply the JIT system of production is one based on the philosophy of to tal elimination of waste, which seeks the utmost rationality in the way production is carried out. Bicheno (1991) further states that JIT aims to meet demand instantaneously, with perfect quality and no waste. In order to achieve this, an organisation requires a whole new approach in how it operates. Harrison (1992) identified three important issues as the core of JIT philosophy, namely the elimination of waste, the involvement of everyone and continous improvement. The following is a brief description of these three key issues (adapted from Operations Management by Andrew Greasly, 2006). Eliminate Waste Waste may be defined as any activity which does not add value to the operation. Ohno (1995) and Toyota have identified seven types of waste, which apply in many different types of operations, in both manufacturing and service industries. All of these types of wastes are displayed in figure 2.3 below. The involvement of everyone Organisations that implement a JIT system are able to create a new culture where all employees are encouraged to continously improve by coming up with ideas for improvements and by performing a range of functions. In order to involve employees as much as possible, organisations would have to provide training to staff in a wide range of areas and techniques, such as Statistical Process Control and more general problem solving techniques (Andrew Greasley 2002). Figure 2.: Types of wastes present in different types of operations Operations Management by Andrew Greasly (2002) Continuous Improvement Slack and Johnston (2001) note that JIT objectives are often expressed as ideals. Futhermore, Greasly (2002) states that through this philosophy, organisations would be able to get to these ideals of JIT by a continuous stream of improvements over time. The Benefits of Just-In-Time According to Russell and Taylor (2003), after fives years from implementing JIT a number of U.S. manufacturers were able to benefit from 90 percent reductions in manufacturing cycle time, 70 percent reductions in inventory, 50 percent reductions in labour costs, and 80 percent reductions in space requirements. These results are not achieved by each and every organisation that implements a JIT system, however JIT does provide a wide range of benefits, including: Reduced inventory Improved quality Lower costs Reduced space requirements Shorter lead time Increased productivity Greater flexibility Better relations with suppliers Simplified scheduling and control activities Better use of human resources Increased capacity More product variety 2.4 Health and Safety Management The International Labour Organisation (ILO) and the World Health Organisation (WHO) define occupational health as the promotion and maintenance of the highest degree of physical, mental and social well-being of workers in all occupations; the prevention amongst workers of departures from health caused by their working conditions; the protection of workers in their employment from risks resulting from factors adverse to health; and the placing and maintenance of the worker in an occupational environment adapted to his physiological and psychological capabilities. Many countries have introduced legislation which requires employers to manage the health and safety of their employees, and others who might be affected (Waring, 1996). To honour health and safety legislation, organisations have found it necessary to introduce active programmes of accident prevention. The preparation of a properly though-out health and safety policy, which is continously monitored, could dramatically reduce or eliminate injuries and damage to health (Muhlemann, Oakland and Lockyer, 1992). 2.4.1 Responsibilities for Safety All employees in an organisation should be active in creating and maintaining healthy and safe working conditions which are aimed to avoid accidents. Once a health and safety policy is established in an organisation, roles and responsibilities should be allocated within the management structure (Muhlemann, Oakland and Lockyer, 1992). As with other areas such as quality and production within an organisation, health and safety would only be able to progress successfully if all employees are fully co-operative and committed in doing so. A number of organisations have encouraged this total involvement by creating safety representitives, committees, and group discussions whereby all employees in a particular unit meet periodically for discussions about safety (Muhlemann, Oakland and Lockyer, 1992). 2.4.2 Planning for Safety Systematic planning is required to ensure effective planning for health and safety in all workplaces. A health and safety policy should be part of a continous review process which has no tolerance for accidents. This could only take place if the organisation in question adopts a strategy of never-ending improvement (Muhlemann, Oakland and Lockyer, 1992). It should set the scene from the top with regards to top management beliefs, intentions, priorities and requirement from managers and workforce (Waring, 1996). The overall plan should be made up of the basic elements conveyed in figure 2.4 below.

Discussion Non Economic Development Essay

* Why might a country in an early stage of economic and technical development want to limit importation of goods from more developed countries? They might want to sale the same products that these developed countries already have mastered and marketed well. It might be in there interest to enact protectionist legislation. They want to be able sale as much of their domestic product without competition from dominant developed countries firms. This would increase the market share available to sale to their citizens. * When the U.  S. enacts tariffs on lumber imported from Canada who in the U. S. benefits from that tariff (not counting the government itself since that’s where the money paid as a tariff goes)? Who’s hurt? U. S. lumber companies and its stakeholders all benefit from tariffs enacted by the Federal government against lumber imported. This makes U. S. lumber companies more competitive and limits the amount of Canadian lumber able to enter US markets. US consumers are hurt by these tariffs we are not able to get the best possible price. It is not good for commerce in general for the government to be creating artificial prices. The market should be creating prices through supply and demand from interactions between buyers and sellers. * What is the impact of global commerce on world peace? Global commerce is helpful in some areas but it can be the thing that will start the next world war. For centuries man has been fighting over the right to control markets and be able to do business in certain parts of the world. There are obviously not enough resources for every country to be strong producers of products as the United States. It is a fact of capitalism that everyone cannot be the rich. Every country can’t be sellers of the same product. The closest possible thing we can do is get some equality. I do not see how developing countries can advance to the level of US-like status without the US or other developed countries declining.

Lack of Mother’s Love Leads to Self Destruction Essay

In D. H. Lawrence’s short story â€Å"The Rocking-Horse Winner,† Paul’s determination, hunger for love and self-destructiveness result from a lack of love from his mother. Living in a family that equates money with luck, and love, Paul misunderstands what he needs to do to be considered successful. The result of his mother’s self absorption and general coldness causes Paul to eventually ride his luck to the end of his life in a failed search for love. Paul’s determination He wishes to make the house stop murmuring, â€Å"There must be more money!† Paul wants to prove his mother wrong that he is unlucky Severe anxiety over his inability to predict the winners in the big races of the year furthers Paul’s determination Paul’s hunger for love His mother’s behavior toward her children is cold and egotistical Paul equates money with love as learned from his mother His desire to give his mother money as a â€Å"birthday present† to take away her cares Paul’s self-destructive behavior His never-ending quest for â€Å"luck† He assents to give his mother all five thousand pounds when she asks for a lump sum Paul feels he must work harder to come up with the Derby race winner since his mother has squandered the previous money, which leads to his death

Rental And Leasing Services At E Commerce - 1304 Words

Rental and Leasing Services in E-commerce Nowadays, companies provide rental and leasing services on the network is a common type of E-commerce and this industry become more and more widely welcome by people along with the rise of E-commerce. This is because rental and leasing services provide greatly convenient to customers and typically save the budget of customers. There are some well-known E-business companies provide such services like Amazon and Borrowlenses, or other professional sites such as bookrenter, rent the run way and so on. Redbox - HYPERLINK http://www.redbox.com/ http://www.redbox.com/ Amazon - HYPERLINK http://www.amazon.com/ http://www.amazon.com/ Rent the run way - HYPERLINK https://www.renttherunway.com/ https://www.renttherunway.com/ More and more E-commerce industry started to provide rental services. It is not just a one-time purchase and it already including clothing, luxury goods, real estate and so on. This interaction rental model of E-commerce was developed under the background which contain a huge potential demand and still need to guide to develop. This business model based on the demand of lessee which provide a supply and demand information interaction and an online and offline business interaction. It s an electronic expression of lease business model. This model consists of online information service system and operation systems offline. The online information service system including information collection of rentalShow MoreRelatedEnterprise rent a Car Strategy3278 Words   |  13 Pageslargest car rental companies in North America. It specializes in providing customers temporary or a replacement vehicle. Jack Taylor founded the company in 1957 where he started Enterprise Rent-A-Car as an Executive Leasing Company with only seven cars. The company began leasing cars for longer periods. Later on executive leasing launched itself as a short-term rental operation with 17 cars plus a car sales division. That’s when the company changed its name from Executive Leasing to EnterpriseRead MoreProblems, Chapter 6 Acct 4601706 Words   |  7 Pagesearnings would be the earnings that arise from the firm’s ongoing sales and leasing of passenger cars and trucks. An example of an increase in the firm’s permanent earnings would be a contract to supply all of the new vehicles every year in the future to one of the nation’s rental car companies. An example of transitory earnings would be the one-time earnings from a special purchase of cars by one of the nation’s rental car companies. Another example of transitory earnings is the earnings effectRead More Technology in Transportation Essay3221 Words   |  13 Pagesdone yet impossible without the impact of information technology. Technology in Moving People The transportation industry (airline, railway, bus transit, automobile rental agencies) has undergone enormous changes in the way its customers purchase tickets and place reservations. The continuing popularity in e-commerce combined with the widespread increase in the number of people with internet access has caused an explosion in the number of online ticket purchases and reservations. TIA’s newRead MoreMarketing Strategy Of Wal Mart1109 Words   |  5 Pagesstores offer â€Å"Shops at Target† where store space is allocated for boutiques that carry specific designer products such as Odin and The Curiosity Shoppe (MarketLine). Amazon leads Wal-Mart and Target in online sales. However, Target is boosting their e-sales by providing free shipping on orders that are at least $25. Wal-Mart only agrees to ship products for free if an order is $50. Amazon continues to ship all orders for free to its Prime members and provides free shipping to customers who order $35Read MoreEssay on Airline Industry1169 Words   |  5 Pagesinescapably threatened Jetstar’s future revenue, so much so that Qantas chief executive Alan Joyce said that Jetstar was seeing that, so to be competitive at the leisure end we believed Jetstar needed to have direct Melbourne Tullamarine to Sydney services complementing its Avalon operations, assuring that profitable market stays with the group and its not lost to our low-cost competitors ´ (Creedy 2009). Threat of New Entry Low to Moderate A new entrant means competitor undermining the profitsRead MoreE-Business Assignment4191 Words   |  17 PagesE-Business Assignment NAME: GONG YUCHENG DATE: 02/2003 The Internet and Web provide an infrastructure that enables buyers and sellers to find each other online. Companies are now having new sales channels for their products and services, and numerous electronic markets are available for buying and selling at offer prices or through various auction mechanism. Therefore, e-business could include almost all of the issues facing companies who practice business online, including: payment processingRead MoreAnalysis Of Spectrum Properties And Property Management3630 Words   |  15 PagesI. xecutive Summary Spectrum Properties is a leasing and property management company that has been around for over 30 years with a vision to be a family of boutique companies. The company prides itself on focusing on result-based relationships with their clients. By being versatile and implementing creative plans our experienced leaders have made successful real estate deals and making a positive difference in our communities. A new and inspiring office complex is being developed in Downtown CharlotteRead MoreE-Commerce at Yunnan Lucky Air5422 Words   |  22 Pages08-076 August 11, 2008 E-commerce at Yunnan Lucky Air Inaki Berenguer, Cai Shijun, Li Liang, Liu Jing, Ningya Wang Preserve the essence of traditional Chinese culture while learning from successful models of the world. - Yunnan Lucky Air, statement of corporate culture Fortune had favored Yunnan Lucky Air. Four years after its founding in 2004, Lucky Air had grown into a US$104.3 million (RMB720 million) low-cost airline, serving domestic routes from its hub in Kunming, the capital of southwesternRead More A Functional Service Economy Essay example6036 Words   |  25 PagesA Functional Service Economy Green Business. Natural Capitalism. Eco-efficiency. An Eco-economy. These are terms used to describe the desired (and often purely conceptual) transformation of the private sector, from one of often flagrant resource use and disposal into a sustainable and ecologically concerned industry. ?The eco-efficiency imperative is based on the idea that companies must come to terms with the new realities of population growth, increased evidence of global warming, ozoneRead MoreAir Asia Introduction3308 Words   |  14 Pagesairline company to work whereby employees are treated as part of the big family. Besides, AirAsia try to maintain the lowest cost hence everyone can fly with AirAsia. Highest quality product, embracing technology to lower the cost and improvement in service levels will be maintained  by the AirAsia airline also. Lastly, create a globally recognized ASEAN brand will be the mission part of AirAsia. AirAsia makes the low fare model possible and create values through their key strategies such as: Safety first